Quickdata Quikstop-15 Operations Instructions download pdf (Page 10)

Subject to change without notice

Owner Manual

Operating Instructions

2.1A-30004-A02

Page 10 of 36

LINCOLN GmbH & Co. KG  Postfach 1263  D-69183 Walldorf  Tel +49 (6227) 33-0  Fax +49 (6227) 33-259

Check valve

 The check valve:

- serves for the function of the pump element

- prevents the lubricant from flowing back to the housing or

reservoir

1-Reservoir with stirring paddle

2-Pump

3-Check valve, spring-loaded

4-Pressure relief valve

R-Return line

p-Pressure line

1164b95

Fig. 9 - Hydraulic diagram of the pump

Fig. 10 - Arrangement of the pump elements

1163a95

Pump element with adjustable lubricant output

 The mode of operation (suction and supply phase) is the

same as that of the pump elements with fix lubricant

output.

 The lubricant outputs are adjustable from 0.04 to

0.18cm³/ stroke or from 0.7 to 3cm³/ min.

 The pump elements are factory-set to the maximum

lubricant output whereby the adjusting size S should be

29 ± 0.1mm (fig. 12).

Fig. 11 - Adjustable pump element

4158a99

Arrangement of the pump elements

 If several pump elements are to be installed, the installa-

tion arrangement shown in fig. 10 must be adhered to.

 If there is only one pump element, it can be installed in

any position.

 If there are two pump elements, install one in position 3

and the other in position 1.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

No comments

Quickdata Quikstop-15 Operations Instructions Page 10